FK807 Automatic Circular Tube Labeling Machine

This machine is suitable for labeling small products with circular surface or small conical surface. Such as sticker label, sticker film, electronic supervision code, bar code, etc. After labeling products are widely used in medicine, cosmetics, electronics, hardware, plastics and other industries.

Breaking rate is low, labeling quality is excellent, automatic photoelectric tracking, intelligent control, fault alarm, production counting, power saving, production number setting prompt, parameter setting protection, durable and other functions, but also optional hot coding/coding, automatic receiving function, automatic feeding and other functions.

Main Parameter

Product Name	Automatic Circular Tube Labeling Machine
Model	FK-807
Labeling accuracy	±1.0 mm (excluding product and label errors)
Labeling speed	100 ~ 300 pieces/min (depending on product size)
Applicable product diameter	Ф10 mm ~ Ф 30 mm
Applicable label size	Length: 20 mm ~ 100 mm; Width: 20 mm ~ 130 mm
Overall size	About 2050 mm×650 mm×1450 mm (length × width × height)
Suitable power supply	220 V/50 HZ
Machine weight	About 200 Kg
Applicable label diameter	Ф76 mm
Applicable label outside diameter	Ф280 mm
Voltage	220 V
Power	940 W

Requirements for making labels: The space between labels is 2-4 mm. The label is 2 mm away from the edge of the backing paper; The bottom paper of the label should be made of Grassy material. This kind of bottom paper is good in toughness to prevent breakage (avoid cutting the bottom paper). Coil inner diameter 76 mm, outer diameter less than 280 mm, single row arrangement. The above labels should be made according to your products. For specific requirements, please communicate with our engineer. It can be equipped with a coding machine or an inkjet machine to the label head, so as to print the production date, batch number and barcode on the label. The ink-jet printer can also be selected to the conveyor belt to realize the production date, batch number, bar code and other information on the product before or after labeling.

Production Process

Core working principle: The parting wheel will separate the products and put them on the conveyor belt. When the sensor detects that the products have passed, the signal will be sent back to the labeling control system. At the appropriate position, the control system controls the corresponding motor to send out the labels and attach them to the position of the products to be labeled.
Operation process: Put the product (put in the blanking box) — > separate the product and spread it out to the middle of the conveyor chain roller — > product transportation — > product detection — > labeling — > labeling — > collection of labeled products.