- The action is simple and reasonable: the pressing action can be performed in three stages, and each action can be performed separately.
- Set the height to avoid damage to the product due to excessive instantaneous pressure.
- Operation is safe; the equipment is equipped with a safety grating. If an object is sensed during operation, the body automatically suspends operation to ensure the safety of operators in real time.
- The operation is simple: the pressing height is adjusted before the equipment leaves the factory, and it can be used after receiving the equipment and turning it on. There is no complicated debugging process. If you need to modify the lamination height, you can directly enter the value and it only takes a few seconds.
- It is extremely efficient: it only takes a few seconds for the equipment to run a process. When used with a jig, 100 products can be pressed simultaneously in one operation cycle.
- Faults are extremely low; thanks to the simple and reasonable structure, the equipment has no easy failure points, saving worry and effort.
|554 x 603 x 1550 mm
|The scope of work
|300 x 460 x 130 mm
|Stepper motor + screw
|Touch screen + buttons
|Full voltage AC 220 V 50/60 HZ